Soldering - Red Box Tools

Draper 04888 – Inside Pc Lens For Use With Welding Helmet – Stock No. 02516

admin — Sun, 28 Jan 2024 16:01:00 +0000

This auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to 9-13 shade level. The dark shade, sensitivity and delay time are adjustable using control knobs. The helmet is powered by a solar cell and a lithium-ion battery (replaceable). The 92.5 x 42.5mm viewing area provides very good visibility of the weld zone. It is suitable for TIG, MIG and arc welding, plasma cutting and also grinding. The comfortable headband is adjustable using the knob to enable an optimal fit.

1 x Draper Storm Force Auto-Darkening Welding Helmet

Suitability: TIG, MIG, arc, grinding and plasma cutting
Lens size: 92.5 x 42.5mm
Shade levels: 4 and 9-13
Lens switching time: 3/10,000s
ARC sensors: 2
Sensitivity control: Rotary dial
Operating temperature: -5 to +55‚ÑÉ
Power supply: Li-ion battery and solar
Battery: 600mAh Li-ion (replaceable)
Weight: 440g

The post Draper 04888 – Inside Pc Lens For Use With Welding Helmet – Stock No. 02516 appeared first on Red Box Tools.

Draper 04902 – MIG Welder Wire Feed Drive Roller, 0.6-0.8mm

admin — Sat, 15 Jul 2023 23:02:26 +0000

For use with MIG welders, this wire feed drive roller feeds the wire from the reel through the welder to the torch. To be used when the ready-installed roller is not the required size. Compatible for use with Draper welders Stock No. 70043 and 70046.

Wire (diameter): 0.6-0.8mm

The post Draper 04902 – MIG Welder Wire Feed Drive Roller, 0.6-0.8mm appeared first on Red Box Tools.

Draper 04903 – MIG Welder Wire Feed Drive Roller, 1.0-1.2mm

admin — Sat, 15 Jul 2023 23:02:26 +0000

Wire (diameter): 0.6-0.8mm

The post Draper 04903 – MIG Welder Wire Feed Drive Roller, 1.0-1.2mm appeared first on Red Box Tools.

Draper 03861 – 12V Soldering Iron (Sold Bare)

admin — Sun, 29 Jan 2023 01:36:47 +0000

This cordless 12V soldering iron is part of the 12V Power Interchange series and is designed for heating solder for attaching or tinning electrical components, cables or conductors. It features a temperature indicator, LED light and a capacity indicator.The three-stop pivoting head offers 0, 45, 90° angle use to accommodate tighter positions and give a more comfortable and stable grip. Batteries and chargers are available separately. The 12V interchangeable battery system allows users to combine one battery with any of the tools within the 12V series (not compatible with Draper 20V).

1 x 12V Soldering Iron (Sold Bare)

Power: 12V (Li-ion)
Weight: 0.231kg

The post Draper 03861 – 12V Soldering Iron (Sold Bare) appeared first on Red Box Tools.

BAHCO – 329500350 – Chisel Shaped Spare Tip for 329500300 and 329500400 Electronic Soldering Iron

admin — Wed, 09 Nov 2022 02:06:59 +0000

Suitable for 329500300 and 329500400 electronic soldering iron
Both tips fit in both soldering irons
329500350: chisel shaped, 329500450: pencil shaped
Designed for the most demanding jobs where precision is of the utmost importance
Soldering range provides all you need for soft soldering – a method of producing reliable electrical connections

Weight, g5g|Tip thickness3 x 2 mm

The post BAHCO – 329500350 – Chisel Shaped Spare Tip for 329500300 and 329500400 Electronic Soldering Iron appeared first on Red Box Tools.

Draper 03860 – Draper Storm Force 10.8V Soldering Iron (Sold Bare)

admin — Thu, 03 Nov 2022 21:24:55 +0000

This cordless 10.8V soldering iron is part of the Draper Storm Force® 10.8V Power Interchange series and is designed for heating solder for attaching or tinning electrical components, cables and conductors. It features a temperature indicator, LED light and a capacity indicator. The three-stop pivoting head offers 0, 45, 90° angle use to accommodate tighter positions and give a more comfortable and stable grip. Batteries and chargers are available separately. The Draper Storm Force® 10.8V interchangeable battery system allows users to combine one battery with any of the tools within the 10.8V Storm Force series (not compatible with Draper Storm Force® 20V).

The post Draper 03860 – Draper Storm Force 10.8V Soldering Iron (Sold Bare) appeared first on Red Box Tools.

Draper 98450 – Collet, 16mm, for Stock No. 70087 and 57096 (Pack of 5)

admin — Wed, 27 Jul 2022 11:42:28 +0000

TIG welding torch with 35/50 dinse type plug and 3/8″ BSP fitting. Lightweight, durable and air cooled with rubber head mouldings for greater heat resistance. 4m cable. Suitable for TIG welding up to 250A. Supplied with accessory pack including 1.6mm collet, 1.6mm collet body and 10mm (No.6) ceramic.

1 x 1.6mm collet
1 x 1.6mm collet body
1 x 10mm (No.6) ceramic

The post Draper 98450 – Collet, 16mm, for Stock No. 70087 and 57096 (Pack of 5) appeared first on Red Box Tools.

Draper 98451 – Collet Body, 1.6mm, for Stock No. 70087 and 57096 (Pack of 3)

admin — Wed, 27 Jul 2022 11:42:28 +0000

Collets and collet bodies hold and position the tungsten electrode in a TIG torch body. The 1.6mm collet bodies in this pack of three are for use with the Dinse Type 35–50 Air Cooled TIG Welding Torch, 4m (Stock No. 70087) and the TIG Welding Torch for All Draper Inverter/Welders (Stock No. 57096).

3 x Collet bodies

Weight: 0.039kg

The post Draper 98451 – Collet Body, 1.6mm, for Stock No. 70087 and 57096 (Pack of 3) appeared first on Red Box Tools.

Draper 98519 – Electrode for Stock No. 03358 (Pack of 5)

admin — Wed, 27 Jul 2022 11:42:28 +0000

A pack of five electrodes for the 80A plasma cutting torch (Stock No. 03358).

5 x Electrodes

The post Draper 98519 – Electrode for Stock No. 03358 (Pack of 5) appeared first on Red Box Tools.

Draper 70073 – MIG Welding Torch, 250A

admin — Wed, 27 Jul 2022 11:34:10 +0000

This MIG Welding Torch has a 3m-long 25mm² Euro fitting cable. The welding torch is for use with MIG welders with a charge value up to 250A.

1 x MIG Welding Torch, 250A

Cable: 25mm² x 30m
Weight: 2.347kg

The post Draper 70073 – MIG Welding Torch, 250A appeared first on Red Box Tools.

Draper 03357 – Plasma Cutting Torch, 55A

admin — Wed, 27 Jul 2022 11:34:10 +0000

This 55A Plasma Cutting Torch has a 4m-long 8mm² cable and is suitable for plasma cutting up to 55A. It has a Euro-style connector and is supplied with an electrode, ceramic shroud and nozzle (already installed on the torch) and cutting guide.

1 x Electrode
1 x Ceramic shroud and nozzle
1 x Cutting guide

Max. charge: 55A
Air pressure: 5.5‚Äì6bar
Duty cycle: 60%
Weight: 1.740kg

The post Draper 03357 – Plasma Cutting Torch, 55A appeared first on Red Box Tools.

Draper 03358 – Plasma Cutting Torch, 80A

admin — Wed, 27 Jul 2022 11:34:10 +0000

This 80A Plasma Cutting Torch has a 4m-long 8mm² cable and is suitable for plasma cutting up to 80A. It has a Euro-style connector and is supplied with an electrode, ceramic shroud and nozzle (already installed on the torch), cutting guide and a tip removal wrench.

1 x Electrode
1 x Ceramic shroud and nozzle
1 x Cutting guide
1 x Tip removal wrench

Max. charge: 80A
Air pressure: 5.5‚Äì6bar
Duty cycle: 60%
Weight: 1.93kg

The post Draper 03358 – Plasma Cutting Torch, 80A appeared first on Red Box Tools.